Stand-alone Integrated C2000 Piccolo Microcontroller Module
E22-MSB is a complete stand-alone integrated C2000 Piccolo microcontroller module that features all the hardware and software necessary to develop applications based on the Texas Instrument C2000 Piccolo F2803x microprocessor. It offers an on-board JTAG emulation tool allowing direct interface to a PC for easy programming, debugging, and evaluation. In addition to JTAG emulation, the CAN interface provides a common industrial serial connection from the F2803x device to the host PC.
Global ET offers a unique combination of expertise in power control electronics, compact and robust power control products, patented technology, and an outstanding performance history.
E22-MSB Features
-
High-speed 32-bit, 60 MHz DSP microcontroller with Flash memory and on-board serial boot-loader (via CAN)
- 16 Analog-to-Digital Convertor (ADC) inputs with filter networks for sensing voltages, currents, and temperatures
- PWM control of up to three channels
- CAN, LIN, SCI, and I2C buses
- SPI bus with spare dedicated chip selects
- SPI EEPROM (2k x 8-bit)
- Header connectors for external expansion
- General Purpose Input/Output (GPIO)
- Inputs for digital rotary quadrature encoder and speed sensors
- Status LEDs for on-board power supplies and CPU operation
- On-board regulated DC power supplies
- Powered from 28V bus, MIL-STD-1275 compliant
- Crowbar of power supplies from external Nuclear Event Detection (NED) trigger
- Seamless connection to E22-MFB power electronics board and Power Control Unit (PCU)
- Compact PCB size: 2" x 2"
E22 MSB Applications
- Motor Control
- Military Ground Vehicle Power Management
- Off Highway and Heavy Duty Vehicles
- Robots
- DC Power and Load Management
- Solid-State Relay
- SMPS Power Conversion
- Data Acquisition
- Power Distribution
- Point of Load Control
High Performance Solid State Multi-Channel
H-Bridge Module
E22-MFB is a complete stand-alone or integrated high performance power electronics H-bridge (four switches) board for solid-state control of +28 VDC loads. Dual, independent half-bridges provide PWM, high-side and low-side control of lamps, coils, and motor loads and SMPS power conversion. The E22-MFB can be seamlessly integrated with Global ET’s E22-MSB for advanced software control.
Global ET offers a unique combination of expertise in power control electronics, compact and robust power control products, patented technology, and an outstanding performance history.
E22-MFB Features
- Ultra-low RDSon (<1 milliohm, combined) power MOSFETs with low profile mounting to heat sink
- Current sensing shunts with differential amplifiers
- On-board gate drivers (60V) with 20kHz PWM capability, 100% Full ON, and fault sensing
- Half-bridge design with complementary driver enables active synchronous clamp fly-back for inductive loads, reducing power and heat
- On-board temperature sensors
- Powered from 28V bus, MIL-STD-1275 compliant
- Provisions for zero voltage switching (ZVS) for SMPS power conversion applications, including synchronous rectification
- Seamless connection to E22-MSB Micro-Sense Board and Power Control Unit (PCU)
- May run without a micro board as a dual standalone solid-state relay
- Compact PCB size: 2” x 2
E22-MFB Applications
- Motor Control
- Military Ground Vehicle Power Management
- Off Highway and Heavy Duty Vehicles
- Robots
- DC Power and Load Management
- Solid-State Relay
- SMPS Power Conversion
- Data Acquisition
- Power Distribution
- Point of Load Control
Interface Termination Break-Out Board
E22-BOB is an interface termination break-out board for the E22-MSB complete stand-alone integrated C2000 Piccolo microcontroller module. It offers convenient wire-to-board termination blocks for access to the fine pitch headers on the E22-MSB.
Global ET offers a unique combination of expertise in power control electronics, compact and robust power control products, patented technology, and an outstanding performance history.
E22-BOB Features
- 20-30 AWG terminal blocks
- Compact PCB size: 2" x 2"
E22-BOB Applications
- Motor Control
- Military Ground Vehicle Power Management
- Off Highway and Heavy Duty Vehicles
- Robots
- DC Power and Load Management
- Solid-State Relay
- SMPS Power Conversion
- Data Acquisition
- Power Distribution
- Point of Load Control
Serial Peripheral Interface Data Acquisition Board
SPI-DAQ is an interface termination break-out board for the E22-MSB complete stand-alone integrated C2000 Piccolo microcontroller module. It offers convenient expansion of 8 analog-to-digital (ADC) channels and 4 digital input/output (DIO) channels.
Plug-on electronic module that expands the sensing capability by 8 sensors and expands the Digital Input/Output by 4. The SPI-DAQ is great for additional information and more sophisticated power control and optimization at or near the point of load.
SPI-DAQ Features
- TI ADS7951 ADC Chipset
- 8 12-bit ADC channels
- 4 DIO channels
- 0.050" pitch header pins
- Compact PCB size: 1" x .5"
- 1 MHz sample rate
SPI-DAQ Applications
- Motor Control
- Military Ground Vehicle Power Management
- Off Highway and Heavy Duty Vehicles
- Robots
- DC Power and Load Management
- Solid-State Relay
- SMPS Power Conversion
- Data Acquisition
- Power Distribution
- Point of Load Control